Rippeon Equipment Co., Maryland
Kubota
TRANSLATE

Land Pride RC4015

RC4015 for sale at Rippeon Equipment Co., Maryland. Serving your new and used equipment needs from Baltimore, Frederick, Gaithersburg, and Westminster, MD.

Land Pride RC4015 for sale at Rippeon Equipment Co., Maryland

Double tap to zoom

Land Pride RC4015 for sale at Rippeon Equipment Co., Maryland

 

Features

Features Benefits
Surpassed rugged
industry standards
All Land Pride Rotary Cutters have been designed and tested and meet rigorous
voluntary testing procedures according to ISO 4254.
Factory assembled Arrives for quick and easy set-up. Minimal time is wasted setting or prepping the unit.
7 Year gearbox warranty* Shows confidence in gearbox integrity. (6th & 7th year parts only)
Rugged heavy built gearboxes Capable of handling heavy cutting applications.
Gearbox seal protection Gearbox bottom seal protection for longer bearing life.
2 Piece shield on wing gearboxes Driveline grease zerks are easier to access.
LP Performance self-leveling hitch Reduces drawbar wear by keeping hitch level while going through ditches.
Low hitch weight on tractor tongue Ideal for smaller hp tractors by reducing the amount of weight on the drawbar
Narrow A-frame hitch Allows for a tighter turning radius.
Adjustable park jack angle Park jack can be adjusted to be perpendicular to the ground.
Adjustable driveline hanger Serves as a support rest for the driveline when the cutter is unhooked from the tractor.  Assist operator when attaching driveline to tractor power take-off shaft.
Input driveline:
Cat. 6 CV or Cat. 5 Conventional
Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint
allows for 80 degree turns without doing damage to the driveline.
Cat. 5 intermediate & Cat. 4 wing
drivelines with slip-clutches
Driveline is sized right for the intended cutting capacity. Slip-clutch will slip under load
instead of twisting the driveline.
Grease zerks on end caps of
driveline cross journals
Intermediate and wing driveline cross journals are easier to grease.
High blade tip speed (See
Specifications for actual FPM)
Allows clean cutting of material.
6" Blade overlap Eliminates skipping during turns.
Left wing rotates clockwise Better discharge of material. Picks up tractor tracks.
3/16" Round stump jumper Standard thick stump jumper material keeps damage to a minimum.
Smooth top design Reduces accumulation of debris and is easier and faster to clean.
Deck sheet tops are 100% welded Makes center decks and wing decks stronger.
1/4" Sidewall thickness Increased thickness reduces damage from objects being thrown into deck sidewalls.
Beveled skid shoes on wings Reduces gouging the ground when turning.
Hinged wing sections Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches and
hollows can cause uneven cutting.
1" Solid hinge rods Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in
the hinge area itself.
Wing transport locks Wing transport locks securely hold the wings in the folded position in case of hydraulic
failure.
Enclosed front to rear dual
leveling rods
Dual leveling rods enable the cutter to pull equally on the rear axle during travel over
rough terrain.
5-Bolt hubs 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
Spring cushioned center-axle Protects unit from bumps and ground shock.
Replaceable wheel spindles Wheel spindles can be replaced when damaged without replacing entire axle
assembly.
LED Signal lights LED lights are bright, long lasting, and resistant to vibration, unlike incandescent
counterparts.
Wheel options Laminated tires: Eliminates flats.
Airplane tires without foam filling: Give better cushion while transporting.
Airplane tires with foam filling: Give better cushion while transporting and can’t go
flat.
LP Performance hitch option Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and
pivots about the tractor drawbar.
Double swivel hitch option Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and
pivots about the tractor drawbar.
Bar-tite hitch option Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
Deck ring option Keeps blades from damaging the deck.

Specifications

Specifications & Capacities RC4015 & RCM4015
Horsepower range 50 - 200
Gearbox Horsepower 540 rpm or 1000 rpm
250 hp Divider
210 hp Center & Wings
  210 hp Center & Wings
Gearbox lubrication Gear Lube 80-90W EP
Gearbox oil capacity Splitter: 3.5 pints; Center deck & Wings: 6 pints
Cutting capacity 3 1/2"
Weight
Total weight
Tongue weight

3,730 lbs.
1,240 lbs.
Blade tip speed
At 540 rpm
At 1000 rpm

Center blades = 16,300 FPM Wing blades = 16,300 FPM
Center blades = 16,300 FPM Wing blades = 16,000 FPM
Hitch types Standard Clevis, LP Performance Hitch, Bar-Tite Hitch, Ball Hitch, or Pintle Hitch
Hitch jack Standard (7,000 lbs.)
Signal Lights
7 Pin connector
LED
SAE J5560 pin configuration
Cutting width
Overall width
Minimum transport width
15'-0"
15'-9"
7'-11 3/4"
Overall length 15'-6" (With center deck raised fully up)
Deck height 12"
Cutting Height 2" - 14"
Lift hydraulics 3" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers
Wing hydraulics 2 1/2" x 12" hydraulic cylinders, hoses & fittings
Wing Transport protection Wing Transport Locks
Deck material thickness 10 Gauge
Side skirt thickness 1/4" Steel
Skid shoes
Wing deck
Center deck

AR400 1 Replaceable skid shoe per wing
AR400 2 Replaceable skid shoes
Blades - 6 (2 per carrier) 1/2" x 4" Heat Treated
Free Swinging Alloy Steel with Uplift
Blade overlap 6"
Blade bolt Keyed with hardened flat washer & locknut
Stump jumper / blade holder 3/16" Thick round dish shaped pan, reinforced with 1" x 4" blade bar
Deck rings Optional
Front & rear guards Optional rubber, single row chain, or dual row chain
Input driveline 540 & 1000 rpm Cat. 6 with constant velocity u-joint or Cat. 5 with conventional (non-cv) u-joint
Intermediate driveline Standard - Category 4 with Slip-Clutch
Wing drivelines Standard - Category 4 with Slip-Clutch
Tire options 6" x 21" Laminated tires, 25.5" new foam filled tires,
29" x 16 ply used aircraft tires without foam filling.
Number of wheels 4 - Wheels: Two on transport axle and one on each wing axle
6 - Wheel option: Four on transport axle and one on each wing axle.
8 - Wheel option: Four on transport axle and two on each wing axle.
Transport axle Spring-cushioned on center transport axle
Hubs Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts.