Rippeon Equipment Co., Maryland
Kubota
TRANSLATE
Rippeon Equipment Co., Maryland
Gaithersburg
866-Rippeon
700 East Diamond Ave
Gaithersburg, MD 20877
Call Us
Directions
Frederick
866-Rippeon
9640 Liberty Rd
Frederick, MD 21701
Call Us
Directions
Westminster
866-Rippeon
1115 Baltimore Blvd
Westminster, MD 21157
Call Us
Directions
Baltimore
866-Rippeon
3828 Washington Blvd
Baltimore, MD 21227
Call Us
Directions
Used Inventory »
New Inventory »
Shop Online

Exmark QZS708GEM54200

New Equipment / Exmark / Zero-Turn Mowers / Quest / QUEST S-SERIES / QZS708GEM54200

QZS708GEM54200 for sale at Rippeon Equipment Co., Maryland. Serving your new and used equipment needs from Baltimore, Frederick, Gaithersburg, and Westminster, MD.

Exmark QZS708GEM54200 for sale at Rippeon Equipment Co., Maryland

Double tap to zoom

Exmark QZS708GEM54200 for sale at Rippeon Equipment Co., Maryland

 

Features

Simple, Easy Adjustments

With a single-point height adjust, it's easy to vary the Quest's cutting deck. Our 50- and 54-inch mowers are equipped with a foot lift-assist, which eases lifting and lowering the cutting deck. (Optional on 42-inch model)

Engine Protection

Standard, rear engine guard provides increased protection of critical engine components.

Fuel Tank Capacity

A single, 3.0-gallon tank with one fill location keeps you mowing longer with fewer fill-ups.

Commercial-Grade Tires

Standard on Quest mowers, the commercial-grade front caster tires and rear drive tires provide increased traction for superior handling.

Commercial Features

Exmark's Quest S-Series is a premium entry-level zero-turn mower. The proven commercial features have been adapted for consumer use including the tires and fabricated deck.

Professional Styling, Superior Comfort

The Quest S-Series mower has the commercial Exmark styling and provides a premium, ergonomic seat system that delivers a smooth, comfortable ride, even over uneven terrain.

Specifications

EQUIPMENT  
Blade Spindles No maintenance, sealed and non-greasable spindles; 5.50"-diameter cutter housing with 17mm (.67") diameter spindle shaft.
Drive Tires 20 x 10.0-10 Turf Tech TL
Tractor Frame Unibody, riveted 10-guage steel.
Steering Control Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
Front Caster Tires 13 x 6.5-5 smooth-tread, pneumatic.
Parking Brake Automatic-actuated pawl brake.
Seat Commercial grade, high back contoured foam padded with arm rests. Hinged mounting and spring suspension. Adjustment is fore and aft for operator position.
Electrical 12 volt battery with 15-amp alternator
Standard Features Cup holder and hitch
Optional Features Engine hour meter, cup holder and hitch
UPC 193308215693
POWER COMPONENTS  
Engine Brand Exmark
Engine Model LC2P77F
Engine Displacement 708
Engine Series V-Twin
Fuel System Carbureted
Engine Speed 3,300 rpm
Air Filter Standard Engine Manufacturer's air filter
Fuel Type Gas Carbureted
Fuel Capacity 3-gallon (11.0-L), single fuel tank with single fill locations
Fuel Indicator Translucent Visual
Drive Hydro-Drive
Drive Description Two Hydro-Gear ZT-2100 hydro static transmissions with no hoses and integrated cooling fans and integrated reservoir
Speed Infinitely variable speed selection from 0-7.0 mph (11.3 kmph) forward, 0-5.0 mph (8.0 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock.
ROPS Optional Rigid ROPS with seat belt and latch.
PTO Engagement Electromagnetic 105-ft-lb clutch
Drive Wheel Release Allows unit movement without engine running.
Casters .25" thick caster yoke arms.
Engine Spec K4969
*THE GROSS HORSEPOWER OF GASOLINE ENGINES WAS LABORATORY RATED AT 3600 RPM BY THE ENGINE MANUFACTURER IN ACCORDANCE WITH SAE J1940 OR SAE J2723. THE GROSS HORSEPOWER OF THE 3TNV80FT WAS LABORATORY RATED AT 2600 RPM; THE 3TNV88C WAS LABORATORY RATED AT 3000 RPM BY THE ENGINE MANUFACTURER IN ACCORDANCE WITH SAE J1995. AS CONFIGURED TO MEET SAFETY, EMISSION AND OPERATING REQUIREMENTS, THE ACTUAL ENGINE HORSEPOWER ON THESE MOWERS MAY BE SIGNIFICANTLY LOWER.
DECKS  
Width / Cutting Deck 54"
Deck Style Floating Deck
Deck Style Description Series 2 fabricated and welded steel deck. Decks have side discharge standard with the option ot bag or mulch.
Deck Construction 10-gauge top that is formed and welded, 12-gauge side skirt and 7-gauge welded bumper. 4 point suspension.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.50" (1.3 cm) increments, adjustable from operator's seat.
Blades 3 Blades at 18.75" Length
DIMENSIONS  
Width 65.2 in. (166.0 cm)
Length 76.0 in. (193.0 cm)
Height 46.6 in. (119.0 cm)
Curb Weight 616