Exmark RAX921GKA604A3
RAX921GKA604A3 for sale at Rippeon Equipment Co., Maryland. Serving your new and used equipment needs from Baltimore, Frederick, Gaithersburg, and Westminster, MD.
Features
UltraCut Deck Technology
Exmark’s exclusive UltraCut decks are featured on Radius models in a choice of 48- to 60-inch cut widths. Every UltraCut cutting deck features Exmark’s exclusive maintenance-free, sealed-bearing spindle assemblies for increased durability and reduced downtime, combined with zero maintenance.
Heavy Duty Unibody Frame
Fully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability.
Quick Adjustable Rollover Protection System (ROPS)
Uses an easy-to-fold up-and-down design built from round tubes and provides flexibility for placement of accessories.
Fuel Gauge Window
Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models.
Height of Cut Made Easy
The height of cut is positioned to provide an open operator platform that allows the operator to quickly locate the preferred cut position when viewing from the top down.
Comfort Stepped Up
X-Series machines step up to Exmark’s full-suspension seating system, with three inches of adjustable vertical suspension combined with patented EVC stretch fabric to provide maximum operator isolation from bumps and vibration.
Service Made Easy
A tools-free removable foot rest eases access to the top-side of the cutting deck, and tool-less removable belt shields provide easier access to belts and spindles. A welded jack receiver on the Radius frame allows for easier service to the bottom-side of the deck when combined with the optional jack.
Specifications
NOTES: N/A in California
| Equipment | |
| Blade Spindles | No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver. |
| Drive Tires | 24 x 12-12 K3012 (142-7676) |
| Tractor Frame | Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel. |
| Steering Control | Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment. |
| Front Caster Tires | 13 x 6.5-6, smooth tread, pneumatic. Sealed Taper Roller Bearings |
| Parking Brake | Lever-actuated pawl brake. |
| Seat | Deluxe suspension (adjustable spring suspension) seat with high back, molded foam flip-up armrests, and integral safety switch |
| Electrical | 12-volt battery with 15-amp alternator. |
| Standard Features | Engine hour meter, cup holder, tow hitch and jack receiver |
| UPC | 193308219998 |
| Power Components | |
| Engine Brand | Kawasaki® |
| Engine Model | FX921V |
| Engine Displacement | 999cc |
| Engine Series | V-Twin |
| Engine Type | Carbureted |
| Engine Speed | 3,750 rpm |
| Air Filter | Heavy-Duty canister air filtration system |
| Fuel Type | Gas Carbureted |
| Fuel Capacity | 7-gallon (26.5-L) single fuel tank with single fill location. |
| Fuel Indicator | Translucent Visual |
| Drive | Hydro-Drive |
| Drive Description | Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters. |
| Engine HP* | 31 HP* |
| Speed | Infinitely variable speed selection from 0-10.0 mph (16.1 kmph) forward, 0-6.0 mph (9.7kmph) reverse. |
| Carb Compliant | No |
| Deck Lift | Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
| Safety Package | Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
| ROPS | 2-post foldable ROPS standard with seat belt and latch. |
| PTO Engagement | MagStop electromagnetic 225-ft-lb clutch |
| Drive Wheel Release | Allows unit movement without engine running. |
| Casters | .375" thick caster yoke arms |
| Engine Spec | _S04 |
| Decks | |
| Width / Cutting Deck | 60" |
| Deck Style | Floating Deck |
| Deck Style Description | Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Deck Construction | 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt. |
| Blade Tip Speed | Approximately 18,500 fpm. |
| Cutting Heights | 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat. |
| Blades | 3 Blades at 20.50" Length |
| Dimensions | |
| Width | 73 in (185 cm) |
| Length | 82 in (208 cm) |
| Height | 70 in (178 cm) |
| Curb Weight | 1032 |
| * | *THE GROSS HORSEPOWER OF GASOLINE ENGINES WAS LABORATORY RATED AT 3600 RPM BY THE ENGINE MANUFACTURER IN ACCORDANCE WITH SAE J1940 OR SAE J2723. THE GROSS HORSEPOWER OF THE 3TNV80FT WAS LABORATORY RATED AT 2600 RPM; THE 3TNV88C AND THE 3TNV86CT WAS LABORATORY RATED AT 3000 RPM BY THE ENGINE MANUFACTURER IN ACCORDANCE WITH SAE J1995. AS CONFIGURED TO MEET SAFETY, EMISSION AND OPERATING REQUIREMENTS, THE ACTUAL ENGINE HORSEPOWER ON THESE MOWERS MAY BE SIGNIFICANTLY LOWER. |
Accessories and Attachments
Micro-Mulch System
The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.
Operator Controlled Discharge (Hand)
The infinitely adjustable blocker door opens and closes, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.
12-Volt Power Adapter
Conveniently located for ease of use. Great for phone chargers or any other operator comfort accessory. (Phone not included.)
5-Gallon Bucket
Carry a 5-gallon bucket on your mower to pick up unwanted debris while mowing. Mount not included.
3-Bushel Bagger
Lightweight and easy to attach, this 3-bushel grass catcher fits most riders, stand-ons and wide-area walk-behinds. 116-7042 spacer adapter required for 36" deck models.
Equipment Cover
Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.
Seat Cover– Suspension 20" Back
Protect your new seat or make your old one look new. Fabric coated for maximum water resistance and repellency. Cushioned for extra comfort. Elastic cord in bottom hem for custom fit. (Fits suspension seat.)
Jack
Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).
Extended Drive Lever Kit
Improve your elbow room while you operate with extended drive levers.
Front Bucket Mount & 5-Gallon Bucket
Easily attach a 5-gallon bucket to your mower to pick up unwanted debris while mowing
Bucket Mount Kit
Easily attach a 5-gallon bucket to your mower to pick up unwanted debris while mowing. Bucket not included.
Hydro Maintenance Kit
Kit includes: 5 Bottles Exmark Premium Hydraulic Oil and 2 Hydro Filters
Light Kit - LED
Better and brighter than ever, this quick-install light kit keeps your productivity going into the night. Low profile, and impact-resistant, this ROPS mounted accessory emits powerful light without the use of significant amperage capacity.
Sun Shade (ROPS)
Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.) (Replaces 116-0513)
Trash Container
Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.
Semi-Pneumatic Tire Assembly
Customize your ride with just the right caster tire.
Turf Striping Kit
Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.
Completing Kit - Powered
UltraVac Completing Kit
2-Bag Collection System – Powered
Switch between bag discharge and side discharge with quick-attach. Compact design minimizes trailer space for easy maneuverability. Power and durability in a low-cost package.
UltraVac
2-bagger commercial-grade powered collection system. Switch between bag discharge and side discharge with quick-attach. Less clogging with larger-diamer tubes. Compact design minimizes trailer space for easy maneuverability. Dust reduction with sealed hoods.
