Rippeon Equipment Co., Maryland
Kubota
TRANSLATE

Land Pride EA20

EA20 for sale at Rippeon Equipment Co., Maryland. Serving your new and used equipment needs from Baltimore, Frederick, Gaithersburg, and Westminster, MD.

Land Pride EA20 for sale at Rippeon Equipment Co., Maryland

Double tap to zoom

Land Pride EA20 for sale at Rippeon Equipment Co., Maryland

 

Features

Features Benefits
Optional auger mounts Fits a wide range of Kubota excavators with a mechanical quick attach coupler or wedge type quick coupler mounted on the end of the excavator arm. Easy hook-up and unhook capabilities. Excavator boom & arm can be used to apply additional down force
Optional cradle Supports the auger while traveling. Keeps the auger from swing erratically. Allows the auger to be carried low without hitting the ground or other protrusions.
Maneuverability Excavator Augers are able to reach over fences or other obstructions.
Planetary gearbox Gearbox is completely sealed with all moving parts running in oil for constant lubrication.
Patent pending vertical indicator Indicates when auger is vertical, makes it easier to drill straight vertical holes.
2" Hex output shaft High torque resistance.
Choice of three drive motors Three flow ranges: 6-15 gpm, 10-20 gpm, and 15-30 gpm Covers a wide range of Kubota excavators.
Hydraulic hoses routed out top of motor/gearbox housing Allows motor/gearbox housing to follow auger into hole and dig a deeper hole without damaging hoses.
Large selection of augers Variety of Dirt, Tree, and Rock Auger sizes and styles to suit many applications
Replaceable hardened steel pilot points on dirt augers Hardened points will last longer than non-hardened. Points are replaceable. Fish tail tips and steel point make it easier to start a hole.
Replaceable carbide pilot points & teeth on rock augers Points are designed for cutting through rock and are replaceable.
Accessories  
Large selection of bolt-on rock heads Pengo Dirt Augers can be converted to Rock Augers with this accessory
Two auger extensions Available in 2 lengths (24" & 48")
Increases the depth of hole the auger can dig by 24" or 48".
Puff auger Used for drilling 2" rock T-post holes in tough conditions.

Specifications

Specifications & Capacities  
Hydraulic requirements 6-30 gpm (22.7-113.6 Lpm) @ 1500 to 3500 psi (10.3 to 24.1 MPa)
Base weight without Options 46 lbs (20.9 kg)
Auger flighting thickness 5/16" (8 mm)
Auger pipe 2 1/2" (6.4 cm) ID
Auger teeth Forged, individually replaceable
40 Degree angle installed on flat side
50 Degree angle installed on angled side
Auger drive Hydraulic
Gearbox Hydraulically driven planetary gearbox; reversible
Gearbox output shaft 2" (5.1 cm) Hex
Gearbox API-GL-5 oil weight SAE 90 @ 35o F (1.7o C) min. temperature
Gearbox oil capacity 14 oz. (414 ml)