Rippeon Equipment Co., Maryland
Kubota
TRANSLATE

Land Pride DZ3096

DZ3096 for sale at Rippeon Equipment Co., Maryland. Serving your new and used equipment needs from Baltimore, Frederick, Gaithersburg, and Westminster, MD.

Land Pride DZ3096 for sale at Rippeon Equipment Co., Maryland

Double tap to zoom

Land Pride DZ3096 for sale at Rippeon Equipment Co., Maryland

 

Features

Features Benefits
Universal Quick Attach-Hitch, Meets ISO 24410 Design for quick and easy attachment to most skid steers and track loaders.
Choice of 84" or 96" working widths Allows customers to choose the blade that meets their operational needs.
Blade pivots hydraulically 6-ways Hydraulic adjustment provides for quick and easy blade positioning. Blade adjust 6-ways to meet the operator’s needs.
Reinforced 3/8" moldboard with fully boxed bracing Provides added strength and durability.
3 1/2" Double acting welded hydraulic cylinders Easily enables angling up to 30 degrees left or right, and tilts 10 degrees up or down. The material can easily be distributed where you want it to go.
Standard operator mounting step Provides for safer and easier mounting into and dismounting from the skid steer cab.
26 1/2" Overall moldboard height Provides ability to perform in deeper material conditions.
Replaceable bottom wear edge Protects underside of moldboard against wear.
Reversible and replaceable 3-piece cutting edge 3-Pieces so that the end user can replace the entire cutting edge or just the high-wear corner sections to reduce maintenance cost.
Heavy 3" diameter pivot pins with greasable hardened spring bushings Large diameter pivot pins stand up to rugged use.
Lubrication helps protect against wear and rust seizing.
Hardened bushings can be replaced if needed.

Specifications

Model DZ3096
Weight 1440 lbs (653.2 kg)
Hitch type Skid steer type Universal Quick-Attach, meets ISO 24410
6-Way blade adjustment Top of hitch plate tilts forward or backward.
Blade angles left or right.
Blade tilts clockwise or counterclockwise
Maximum blade angle 30 degrees left and 30 degrees right
Maximum blade tilt 10 degrees clockwise and 10 degrees counterclockwise
Cylinder size 3 1/2" bore x 8" stroke
Maximum hydraulic pressure 3500 psi (24.13 MPa)
Maximum blade cutting width
At straight across
At 30 degree angle

96" (2.44 m)
83 1/4" (2.11 m)
Moldboard thickness 3/8" (10 mm)
Moldboard height 26 1/2" (67.3 cm)
Pivot bushings Replaceable and greasable, hardened spring bushings
Pivot pin sizes Angle pin = 3" x 11 5/8" lg.
Pivot pin = 3" x 2 13/16" lg.
Cutting edges
End cutting edges
Center cutting edge

3/4" x 8" x 8 1/2" (1.9 cm x 20.3 cm x 21.6 cm)
3/4" x 8" x 78" (1.9 cm x 20.3 cm x 1.98 m)
Wear edge 1/2" x 4" x 96" (1.3 cm x 10.2 cm x 2.44 m)