Rippeon Equipment Co., Maryland
Kubota
TRANSLATE

Toro GrandStand® 48" (122 cm) 22 HP 726cc (72504)

GrandStand® 48" (122 cm) 22 HP 726cc (72504) for sale at Rippeon Equipment Co., Maryland. Serving your new and used equipment needs from Baltimore, Frederick, Gaithersburg, and Westminster, MD.

Toro GrandStand® 48" (122 cm) 22 HP 726cc (72504) for sale at Rippeon Equipment Co., Maryland

Double tap to zoom

Toro GrandStand® 48" (122 cm) 22 HP 726cc (72504) for sale at Rippeon Equipment Co., Maryland

 

Features

25% Faster Speeds
The 10 mph transport speed gets you to your next destination 25% faster.*

Smaller Footprint
With the platform folded, the small footprint allows you to transport more products on the trailer.

Better Visibility
Exceptional operator visibility leads to less property damage and higher quality work.

Easier Maintenance
Access to both sides of the engine, hydros and controls with the easy removal of the fuel tank.

Extra Large Fuel Tank
10.5 gallon fuel tank requires less filling and more time working. Transparent tank make it easy to gauge the fuel level.

Less Maintenance Needed
The elimination of hydraulic hoses, reduced parts, no routine greasing and simplified design, save you time.

Comfortable Ride
The platform has self-adjusting suspension, a larger open area to move around, and sloped sides for a more secure stance when cutting sloped terrain.

Traction On Hills
The low center of gravity of stand-on mowers hug hills and slopes. Operators can easily shift their weight as needed to enhance performance.

Ultimate Cutting Deck
Our exclusive TURBO FORCE cutting deck is built to withstand the extreme conditions of long, tough days on the job. It features a durable bull-nose bumper, high-strength blades and the industries toughest spindle assemblies.

A Flat Crisp Cut with Precision Blades
(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

Smarter design in a bull-nose bumper.
7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.

Patented Adjustable Baffle
Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.

Cast Aluminum Spindle
Cools quickly for enhanced durability and performance.

Specifications

  • Engine
    22 hp (16.4 kw) Kawasaki FX 726cc
  • Fuel Capacity
    Gas/10.5 gal (39.7 L)
  • Cutting Width
    48" (122 cm)
  • Adjustable Discharge Baffle
    Standard
  • Air Filter
    Heavy-Duty Canister Air Cleaner
  • Blade Tip Speed
    18,500+ ft/min
  • Blade Type
    .25" (.6 cm) heat-treated steel
  • Carrier Frame
    3" x 1.5" (7.6 cm x 3.8 cm) x 12 gauge
  • Caster Tires
    11" x 5"-5" (28 x 13-13 cm) flat free semi-pneumatic
  • Clutch
    Electromagnetic
  • Deck Design
    80-grade 7-gauge 48" (122 cm) TURBO FORCE® w/bull-nose bumper
  • Discharge Chute
    Rubber
  • Drive System
    Pumps (10cc/rev) & Wheel Motors (10 cir)
  • Drive Tires
    20" x 10.5"- 8" (51 x 26.67 - 20 cm)
  • Engine Displacement
    726cc
  • Ground Speed
    Up to 10 mph forward (16.1 km/h)
  • Height of Cut
    1" - 5" in 1/4" (2.5 cm - 12.7 cm in 6 mm) increments
  • Hour Meter
    Standard
  • Hydraulic Fluid
    Premium synthetic
  • Spindle Bearings
    Greaseless ball bearings
  • Spindle Housing
    9" (22.9 cm) diameter cast aluminum
  • Steering Controls
    Twin lever
  • Weight
    890 lbs. (403.7 kg)

Accessories and Attachments

Optional Blades
In addition to the high sail blade, which comes standard on Z Master® Z590 Series mowers, additional 1/4" (6 mm) blades are available to match regional and seasonal mowing conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.


Light Kit
The lights easily mount to the mower frame and wiring quickly connects to the existing accessory circuit.

Part # 107-9880 – 7000 Series and Z100-Z500
Part # 116-1154 – G3 and 3000/5000/6000 Series
Part # 130-8469 – 8000 Series Direct Collect Z
Part # 114-3505 – All Grandstands (2015 models and prior)
Part # 133-1437 – All Grandstands (2016 models)
Part # 133-1495 – All Grandstands (2016 models)