Toro 48" (122 cm) Fixed Deck Hydro Drive Pistol Grip (50 State) (39938)

A Flat Crisp Cut with Precision Blades
(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

Rubber Discharge Chute
High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.

Smarter design in a bull-nose bumper.
7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.

Compact Models
Compact 36" (91.4 cm) and 40" (101.6 cm) units can easily fit through gates and maneuver around smaller, tightly landscaped properties.

Premium Hydraulics
Independent, commercial-duty .6 cu. in. (10 cc) displacement pumps and wheel motors provide instant forward and reverse control without shifting.

Unique Under-the-Deck Skid Plate
Reduces scalping when traveling over uneven terrain and to avoid catching while loading onto trailers.

Fast Ground Speed
Infinitely variable ground speed ranging from 0 - 6.2 mph (10 kph) forward, and 0 - 2.2 mph (3.5 kph) in reverse.

Large Drive Tires
Large 16" (40.6 cm) drive tires and 9" (23 cm) smooth, caster tires deliver excellent traction and superior floatation.

Patented Adjustable Baffle
Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.

The Industry's Toughest Spindle Assembly
Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9-3/8" (23.8 cm) diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell.

Exclusive TURBO FORCE Deck
High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.

• Engine
  14.5 hp* Kawasaki® FS481V 603cc
• Fuel Capacity
  5 gallons (19 L)
• Height of Cut
  1" to 4-1/4" in 1/8" increments (2.5 cm to 10.8 cm in 3mm increments)
• Starter
  Recoil
• Mulch, Bag, Side Discharge
  Side-discharge Standard
• Air Filter
  2-Stage Air Cleaner
• Adjustable Discharge
  Standard
• Blade Tip Speed
  18,500 ft/min (5639 m/min)
• CARB Compliant
  Model 39938
• Caster Tires
  9" x 3.50-4" (23 x 9 - 10 cm) Flat-free
• Deck Design
  48" (122 cm) Side Discharge
• Discharge Chute
  High-performance 5/16" (8 mm) rubber
• Drive Tires
  16" x 7.50-8" (40.6 x 19 - 20 cm)
• Ground Speed
  6.2 mph (10 km/h) fwd;
  2.2 mph (4 km/h) rev
• Height
  41" (104 cm)
• Hydraulic Drive
  Twin Hydro-Gear® Pumps
• Hydraulic Fluid
  Premium Synthetic
• Length
  72.3" (182 cm)
• Spindle Housing
  Cast iron with 9-3/8" (23.8 cm) base
• Steering Controls
  Pistol Grips
• Width
  49.6" (126 cm) with chute up
• Disclaimer
  *The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.