Rippeon Equipment Co., Maryland
Kubota
TRANSLATE
  • New Holland

Toro 8000 Series 48" (121.9 cm) 25 HP 725cc (74313)

8000 Series 48" (121.9 cm) 25 HP 725cc (74313) for sale at Rippeon Equipment Co., Maryland. Serving your new and used equipment needs from Baltimore, Frederick, Gaithersburg, and Westminster, MD.

Toro 8000 Series 48" (121.9 cm) 25 HP 725cc (74313) for sale at Rippeon Equipment Co., Maryland

Double tap to zoom

Toro 8000 Series 48" (121.9 cm) 25 HP 725cc (74313) for sale at Rippeon Equipment Co., Maryland

 

Features

Bag, Mulch or Both
The fill-reduction system lets you switch from 100% bagging to 75% mulching and 25% bagging, so the hopper can be emptied less frequently.

Effortless Controls
No need to muscle these mowers around. The controls let you maneumver in tight spots almost effortlessly.

High Capacity
The 9.5-bushel hopper means less time emptying and more time mowing. Exclusive baffle design fills evenly back to front for maximum efficiency.

Out Front Deck Design
The out-front deck design allows for more maneuverability and mowing in tighter areas where traditional zero turns can't get to.

Tough, Deep Decks
Commercial deck is made of welded 7/10 gauge-steel. The deep 4-5/8" design handles taller grass and provides greater vacuum for a clean, refined cut.

Trim On Both Sides
The rear discharge deck allows for trimming on either side keeping flower beds and walkways clipping-free.

Specifications

  • Engine
    25 HP (18.6 kw) Kohler® Command Pro 725cc*
  • Fuel Capacity
    Gas/7.5 gal (28.4 L)
  • Cutting Width
    48" (121.9 cm)
  • Adjustable Discharge Baffle
    Fill reduction baffles standard
  • Air Filter
    Heavy-Duty Canister Air Cleaner
  • Blade Tip Speed
    18,500 ft/min (5,640 m/min)
  • Blade Type
    .164" (.417 cm) heat-treated steel
  • Carrier Frame
    2" x 1.5" x 11 gauge (5.1 cm x 3.8 cm x 11 gauge)
  • Caster Tires
    8" X 3" – 4” (20.3 cm x 7.6 cm – 10.2 cm) Semi Pneumatic
  • Clutch
    Mechanical (lever-operated)
  • Deck Design
    7/10 gauge
  • Drive System
    Tandem Pumps (12cc/rev) & Wheel Motors (18 cir)
  • Drive Tires
    18" x 10.5" – 10" (45.7 cm x 26.7 cm – 25.4 cm)
  • Engine Horsepower
    25 HP
  • Engine Displacement
    725cc
  • Ground Speed
    Up to 7.0 mph forward (11.4 km/h)
  • Height of Cut
    1" - 4" (.25" increments) 2.5 cm – 10.2 cm (.6 cm increments)
  • Hopper Capacity
    9.5 bushels (76 gallons)
  • Hour Meter
    Standard
  • Ignition
    Electric
  • Seat
    Rubber Mounted
  • Spindle Housing
    Cast Iron Gearbox
  • Steering Controls
    Hand Control Levers
  • Weight
    1,170 lbs. (530.7 kg)
  • Disclaimer
    *The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.