Toro 3000 Series 72" (183 cm) 25 HP 747cc (74959) / NOT AVAILABLE
3000 Series 72" (183 cm) 25 HP 747cc (74959) for sale at Rippeon Equipment Co., Maryland. Serving your new and used equipment needs from Baltimore, Frederick, Gaithersburg, and Westminster, MD.
Features
Exclusive TURBO FORCE Deck
High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
7-Gauge, High-Strength Steel
The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
Deluxe Suspension Seat
Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue.
Industry's Toughest Spindle Assemblies
Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles. A stout cast iron housing with a massive base and six mounting bolts absorbs impact loads and distributes them across a broader area of the deck shell. Plus, the solid, one-inch diameter shaft is alloy steel, not the common lower-grade steel used in many competitive models.
72" Deck will have tapered bearing only.
A Flat Crisp Cut with Precision Blades
(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
Rubber Discharge Chute
High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
Rugged Frame
A commercial-grade carrier frame, constructed of 3" x 1.5" tubular steel, supports the cutting deck and stands up to the rigors of professional use.
Folding Rollover Protection System ROPS
A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
Specifications
| Engine | 25 HP* Kohler® Command Pro 747cc |
| Fuel Capacity | Gasoline - 8 gallons |
| Adjustable Discharge Baffle | Standard |
| Air Filter | Heavy-Duty Canister |
| Anti-Scalp Wheels | 4 Standard, 1 Optional |
| Blade Tip Speed | 18,300+ ft/min (5,577.8 m/mim) |
| Blade Type | .25 in (.6 cm) thick heat-treated steel |
| Carrier Frame | 3" x 1.5" x 10 gauge |
| Caster Tires | 13" x 6.5"-6" pneumatic |
| Deck Design | 7-gauge 72 in (183 cm) TURBO FORCE® w/bull-nose bumper |
| Discharge Chute | Rubber |
| Drive Tires | 24" x 12" - 12" |
| Ground Speed | 10 mph forward |
| Height of Cut | 1.0" -5.5" in 0.25" increments |
| Hour Meter | Standard |
| Hydraulic Fluid | Premium synthetic |
| Ignition | Electric Start, Standard |
| ROPS | Folding; standard |
| Seat | Premium Bolstered |
| Spindle Bearings | Maintenance Free |
| Spindle Housing | 9" diameter cast iron |
| Steering Controls | 1-5/8" diameter grips; adjustable, dampened |
| Disclaimer | *The gross horsepower of these engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower. |
Accessories and Attachments
E-Z Vac Twin & Triple Bagger Systems
These baggers deliver the convenience and versatility essential to landscape professionals' productivity. The no-tools, quick-release design allows you to remove the collection system with ease, making it a snap to alternate between bagging and side-discharge.
E-Z VAC TWIN BAGGER
Deck-mounted, spindle-driven fan; 2 commercial-grade mesh bags with reinforced front and bottom; 10 cu. ft. capacity (8 bushels).
L 48" deck – 102.3" (259.8 cm)
W 48" deck – 63.8" (162.1 cm)
L 52" deck – 102.3" (259.8 cm)
W 52" deck – 67.7" (172.0 cm)
E-Z VAC TRIPLE BAGGER
Deck-mounted, spindle-driven fan; 3 commercial-grade mesh bags with reinforced front and bottom; 16.7 cu. ft. capacity (13.4 bushels).
L 60" deck – 106.1" (271.9 cm)
W 60" deck – 75.2" (191.1 cm)
L 72" deck – 109.3" (279.1 cm)
W 72" deck – 87.2" (563.9 cm)
NOTE: Length & width measurements are as installed.
E-Z Vac™ DFS Collection System
Quiet and powerful, the Toro E-Z Vac™ collection system is spindle-driven and offers quick conversion between bagging and side discharge without tools.The horizontal blower impeller is positioned parallel to, and above the mower deck creating continuous airflow from deck to collection system. The Dump-From-the-Seat (DFS) features allows you to dump debris in only seconds - without ever having to leave your seat!
Deck-mounted, spindle-driven fan; Dump-From-the-Seat, commercial- grade steel and polyethylene hopper; 8.3 cu. ft. capacity (6.7 bushels).
L 48" deck – 103.2" (262.0 cm)
W 48" deck – 63.9" (162.3 cm)>
L 52" deck – 103.2" (262.0 cm)
W52" deck – 67.8" (172.1 cm)
Deck-mounted, spindle-driven fan; Dump-From-the-Seat, commercial- grade steel and polyethylene hopper; 13.7 cu. ft. capacity (11 bushels).
L 60" deck – 107.1" (271..9 cm)
W 60" deck – 75.2" (191.1 cm)
L72" deck – 110.2" (281.3 cm)
W 72" deck – 87.2" (221.1 cm)
NOTE: Length & width measurements are as installed.
Recycler® Mulching Kits
Recycler mulching kits deliver the industry's finest mulching performance and reduce mowing time up to 38% vs. bagging*.
*Respondents in a Texas A&M University study cut their lawns 38% faster when they didn't bag.
Optional Blades
In addition to the high sail blade, which comes standard on Z Master® Z590 Series mowers, additional 1/4" (6 mm) blades are available to match regional and seasonal mowing conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
Light Kit
The lights easily mount to the mower frame and wiring quickly connects to the existing accessory circuit.
Part # 107-9880 – 7000 Series and Z100-Z500
Part # 116-1154 – G3 and 3000/5000/6000 Series
Part # 130-8469 – 8000 Series Direct Collect Z
Part # 114-3505 – All Grandstands (2015 models and prior)
Part # 133-1437 – All Grandstands (2016 models)
Part # 133-1495 – All Grandstands (2016 models)
Toro Z Stand™
Exclusive Toro Z Stand provides an on-board tool to simply elevate the front end of the machine and provide access to the underside of the deck.
Part # 105-1622 Z Stand Kit – Z200, Z500, 7000 Series
Part # 117-0354 Z Stand Kit – 72" 5000/6000 Series (Excludes Rear Discharge 74944)
Part # 121-4811 Z Stand Kit – 48"-60" 2000/3000/5000/6000 Series
Utility Bags
Toro® utility bags for riding mowers are ideal for holding trash, tools, keys, and cell phones. They keep landscaping pros on the go and productive by transporting the essentials they need to get the job done. The lightweight yet durable bags are constructed of heavy-duty mesh fabric to keep contents secure, visible and within reach. They're available in over-the-seat and armrest styles and in sizes that match varying machines and mowing needs.
Cool Tops™ Downdraft System
Available exclusively from Toro, the Cool Tops downdraft system is a patented, 12-volt fan that can be mounted to Toro® Z Master® riding mowers equipped with a roll-over protection system (ROPS) - whether old or new. It's designed to promote comfort and productivity by keeping motor heat, insects, and debris off equipment operators. The Cool Tops heavy-duty, S Blade Trimline fan utilizes the power system of a mower's traction unit to deliver an output of 1800 cubic feet per minute (cfm) (50.9 cubic metres per minute) air flow. The fan's sturdy construction measures 25 inches (63.5 cm) long by 20.5 inches (52 cm) wide and includes a steel frame, plus a waterproof motor and switch.
Deluxe Rider Cover
Heavy-duty waterproof cover is abrasion- and tear-resistant. Vented design helps minimize heat and moisture build-up.
Part # 490-7319 Deluxe Rider Cover – All Z-Masters
Operator-Controlled Discharge Chute
Landscape friendly rubber discharge chute provides complete control of clippings. with three discharge settings, from wide open to blocked, the OCDC will put the clippings where you want them and not in beds, streets, etc. The integral design allows the discharge chute to remain in place and on the machine, reducing the risk of personal injury and property damage.
