Rippeon Equipment Co., Maryland
Kubota
TRANSLATE

Toro Professional 5000 Rear Discharge 72" (183 cm) 26.5 HP EFI 747cc (74944) / NOT AVAILABLE

Professional 5000 Rear Discharge 72" (183 cm) 26.5 HP EFI 747cc (74944) for sale at Rippeon Equipment Co., Maryland. Serving your new and used equipment needs from Baltimore, Frederick, Gaithersburg, and Westminster, MD.

Toro Professional 5000 Rear Discharge 72" (183 cm) 26.5 HP EFI 747cc (74944) for sale at Rippeon Equipment Co., Maryland

Double tap to zoom

Toro Professional 5000 Rear Discharge 72" (183 cm) 26.5 HP EFI 747cc (74944) for sale at Rippeon Equipment Co., Maryland

 

Features

Exclusive TURBO FORCE Deck

High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.

7-Gauge, High-Strength Steel

The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.

Industry's Toughest Spindle Assemblies

Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles. A stout cast iron housing with a massive base and six mounting bolts absorbs impact loads and distributes them across a broader area of the deck shell. Plus, the solid, one-inch diameter shaft is alloy steel, not the common lower-grade steel used in many competitive models. 

A Flat Crisp Cut with Precision Blades

(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

Deluxe Suspension Seat

Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue.

Smarter design in a bull-nose bumper.

7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.

Patented Adjustable Baffle

Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.

Smooth, Powerful Response 

The new unitized pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You'll get a smoother, faster response while enjoying an even more reliable machine.

Operator Information Center 

The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.

Folding Rollover Protection System ROPS

A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

Convenience and Comfort

Operator controls are conveniently located. Large 1-5/8" (4.1 cm) diameter steering levers increase comfort and reduce fatigue. Handy storage compartment provides location for cell phone, tools, and more. Built-in cup holder provided.

Specifications

Engine 26.5 hp* (20 kw) Kohler® Command Pro EFI 747cc
Fuel Capacity Gasoline - 12 gal (45.4 L) single-point fill
Adjustable Discharge Baffle Standard
Air Filter Heavy-Duty Canister Air Cleaner
Armrests Standard
Blade Tip Speed 18,500+ ft/min (5638.8 m/min)
Blade Type .25 in (.6 cm) thick heat-treated steel
Carrier Frame 3 in x 1.5 in (7.6 cm x 3.8 cm) tubular steel
Caster Tires 13 in x 6.5 in - 6 in (33 cm x 16.5 cm -15.2 cm) flat-free semi-pneumatic
Cup Holder Standard
Deck Design 7-gauge 72 in (183 cm) TURBO FORCE® w/ bull-nose bumper
Discharge Chute Rubber
Drive System Hydraulic unitized pumps and wheel motors
Drive Tires 24" x 12" - 12" (61 x 30.5 - 30.5 cm)
Ground Speed 10 mph (16.1 kph) forward
Height of Cut 1 in - 5.5 in (2.5 cm x 14 cm) by .25 in (.6 cm) increments
Number of Blades 3
Hour Meter Standard
Hydraulic Fluid Premium synthetic
ROPS Folding; standard
Seat Deluxe suspension
Spindle Bearings Greasable tapered roller bearings
Spindle Housing Cast iron
Steering Controls 1.625 (4.1 cm) dia. levers; adjustable
Disclaimer *The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.