Rippeon Equipment Co., Maryland
Kubota
TRANSLATE
Rippeon Equipment Co., Maryland
Gaithersburg
866-Rippeon
700 East Diamond Ave
Gaithersburg, MD 20877
Call Us
Directions
Frederick
866-Rippeon
9640 Liberty Rd
Frederick, MD 21701
Call Us
Directions
Westminster
866-Rippeon
1115 Baltimore Blvd
Westminster, MD 21157
Call Us
Directions
Baltimore
866-Rippeon
3828 Washington Blvd
Baltimore, MD 21227
Call Us
Directions
Used Inventory »
New Inventory »
Shop Online

Exmark LZS902DKU60R00

New Equipment / Exmark / Rear Discharge Mowers / Lazer Z DS-Series Rear Discharge / LZS902DKU60R00

LZS902DKU60R00 for sale at Rippeon Equipment Co., Maryland. Serving your new and used equipment needs from Baltimore, Frederick, Gaithersburg, and Westminster, MD.

Exmark LZS902DKU60R00 for sale at Rippeon Equipment Co., Maryland

Double tap to zoom

Exmark LZS902DKU60R00 for sale at Rippeon Equipment Co., Maryland

 

Features

Overheat Protection

Tracks engine temperature and oil pressure, placing the machine in safe transport mode – disengaging the PTO when critical levels are exceeded.

Frame Strength

Given the extreme mowing conditions the DS-Series is intended to handle, its frame has to be extraordinarily strong. As in heavy-duty, welded, tubular-steel strong. Which is exactly what it is.

Bio-Diesel Ready

The DS-Series is biodiesel-ready for reduced environmental impact.

Suspension Seat

Comfort increases productivity. That’s why we designed a new, ergonomically advanced seat system.

Rear Discharge Deck

Available in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.

Specifications

Equipment  
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 1.75" diameter splined blade driver and 1.18" diameter spindle shaft.
Drive Tires 26 x 12.0-12, 4-ply Multi-Trac.®
Cup Holder Standard
Tractor Frame Welded, heavy-duty tubular steel.
Steering Control Hydraulically dampened twin levers, adjustable fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Levers are also adjustable to 2-height positions.
Front Caster Tires 15 x 6.00-6, smooth-tread, semi-pneumatic tires.
Parking Brake Lever-actuated drum and band integrated with transmission-neutral interlock.
Seat Deluxe, two tone, bolstered, full-suspension seat with Elastomeric Vibration Control material. Adjusts to individual operator weight and features padded, height-adjustable armrests. Hinged mounting.
Electrical 12-volt battery with 60-amp alternator.
Power Components  
Engine Brand Kubota®
Engine Model D902
Engine Displacement 898
Engine Series Kubota Diesel
Engine Type Diesel
Engine Speed 3,850 rpm
Air Filter Heavy-duty canister air filtration system
Fuel Type Diesel
Fuel Capacity 15.5-gallons (58.7-L) twin fuel tanks.
Fuel Indicator Yes - Float Gauge
Drive Hydro-Drive
Drive Description Two Hydro-Gear 21cc/rev pumps with integral SCR (System Check Relief) valves (in forward), powering two 18-cubic-inch wheel motors with 1.25\\" (3.18 cm) diameter tapered shafts.
Speed Infinitely variable speed selection from 0-12.0 mph (19.3 kmph) forward, 0-8.0 mph (12.9 kmph) reverse
Carb Compliant Yes
Deck Lift Standard; foot or hand controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 250-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters 0.50" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.
Decks  
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch.
Deck Construction 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments and adjustable from operator position via foot or hand operated deck-lift system.
Blades 3 Blades at 20.50" Length
Dimensions  
Width 66.2 in. (168.1 cm)
Length 85.6 in. (217.4 cm)
Height 72.7 in. (184.7 cm)
Curb Weight 1552