Rippeon Equipment Co., Maryland
Kubota
TRANSLATE

Exmark RAE740CKC60300

RAE740CKC60300 for sale at Rippeon Equipment Co., Maryland. Serving your new and used equipment needs from Frederick, Gaithersburg, and Westminster, Maryland.

Exmark RAE740CKC60300 for sale at Rippeon Equipment Co., Maryland

Double tap to zoom

Exmark RAE740CKC60300 for sale at Rippeon Equipment Co., Maryland

 

Features

Large Caster Tires

Radius models are equipped with large front caster tires. 13 x 6.5 pneumatic tires come standard on 48", 52", and 60" models and 13 x 5.0-6 on the 44" model.

Powered by Exmark Engine

Equipped with Exmark’s commercial-grade 24.5-horsepower 708cc V-Twin engine that features a dual barrel carburetor, cast iron cylinder liners and a quick oil drain hose raises the bar for productivity, durability and value. (Not available in California.)

UltraCut Deck Technology

Exmark’s exclusive UltraCut decks are featured on Radius models in a choice of 48- to 60-inch cut widths. Every UltraCut cutting deck features Exmark’s exclusive maintenance-free, sealed-bearing spindle assemblies for increased durability and reduced downtime, combined with zero maintenance.

Heavy Duty Unibody Frame

Fully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability.

Quick Adjustable Rollover Protection System (ROPS)

Uses an easy-to-fold up-and-down design built from round tubes and provides flexibility for placement of accessories.

Fuel Gauge Window

Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models.

Height of Cut Made Easy

The patented height of cut system is a user friendly tool developed for operators to quickly and accurately select the height of cut.

Specifications

EQUIPMENT  
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.30"-diameter cutter housing contains 17mm (.67") diameter spindle shaft and hex blade drive.
Drive Tires 22 x 10.5-12 K500
Tractor Frame Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.
Steering Control Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
Front Caster Tires 13 x 6.5-6, smooth tread, pneumatic. Caged Roller Bearings
Parking Brake Lever-actuated pawl brake.
Seat High back seat with foam padded seat cushion, armrests and integral safety switch
Electrical 12-volt battery with 15-amp alternator.
Standard Features Engine hour meter, cup holder, tow hitch and jack receiver
UPC 193308000367.00
POWER COMPONENTS  
Engine Brand Kohler
Engine Model ZT740
Engine Displacement 747
Engine Series Confidant™
Fuel System Carbureted
Engine Speed 3,700 rpm
Air Filter Heavy Duty Engine Mounted
Fuel Type Gas Carbureted
Fuel Capacity 7-gallon (26.5-L) single fuel tank with single fill location.
Fuel Indicator Translucent Visual
Drive Hydro-Drive
Drive Description Dual Hydro Gear ZT3100, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
Speed Infinitely variable speed selection from 0-8.0 mph (12.9 kmph) forward, 0-5.0 mph (8.0 kmph) reverse.
Carb Compliant Yes
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 125-ft-lb clutch
Drive Wheel Release Allows unit movement without engine running.
Casters .375" thick caster yoke arms
Engine Spec 3051
DECKS  
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.
Blades 3 Blades at 20.50" Length
DIMENSIONS  
Width 72.3 in (183.6 cm)
Length 82.2 in (208.8 cm)
Height 69.7 inches (177.0 cm)
Curb Weight 941

Accessories and Attachments

UltraVac Completing Kit
KIT-COMPLETING 603S

Light Kit - LED
Better and brighter than ever, this quick-install light kit keeps your productivity going into the night. Low profile, and impact-resistant, this ROPS mounted accessory emits powerful light without the use of significant amperage capacity.

Operator Controlled Discharge (Hand)
The infinitely adjustable blocker door opens and closes, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

5-Gallon Bucket
Carry a 5-gallon bucket on your mower to pick up unwanted debris while mowing. Mount not included.

Turf Striping Kit
Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

Seat Cover– Suspension 20" Back
Protect your new seat or make your old one look new. Fabric coated for maximum water resistance and repellency. Cushioned for extra comfort. Elastic cord in bottom hem for custom fit. (Fits suspension seat.)

Bucket Mount Kit
Easily attach a 5-gallon bucket to your mower to pick up unwanted debris while mowing. Bucket not included.

Jack
Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Front Bucket Mount & 5-Gallon Bucket
Easily attach a 5-gallon bucket to your mower to pick up unwanted debris while mowing

UltraVac
2-bagger commercial-grade powered collection system. Switch between bag discharge and side discharge with quick-attach. Less clogging with larger-diamer tubes. Compact design minimizes trailer space for easy maneuverability. Dust reduction with sealed hoods.

Equipment Cover
Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

Completing Kit - Powered

Semi-Pneumatic Tire Assembly
Customize your ride with just the right caster tire.

Sun Shade (ROPS)
Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.) (Replaces 116-0513)

2-Bag Collection System – Powered
Extended Drive Lever Kit

Trash Container
Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

Micro-Mulch System
The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

Hydro Maintenance Kit
Kit includes: 5 Bottles Exmark Premium Hydraulic Oil and 2 Hydro Filters

Engine Maintenance Kit - Kohler
Contains everything a do-it-yourselfer needs to keep their Exmark running like new. Includes Pre-Cleaner Filter, Air Filter, Oil Filter, Fuel Filter, Spark Plugs, Fuel Treatment and Engine Oil.

3-Bushel Bagger Adapter
Adapter required for GC3602 3-Bushel Bagger (48" and 52" models).

12-Volt Power Port