Rippeon Equipment Co., Maryland
Kubota
TRANSLATE

Land Pride RCFM4014

RCFM4014 for sale at Rippeon Equipment Co., Maryland. Serving your new and used equipment needs from Baltimore, Frederick, Gaithersburg, and Westminster, MD.

Land Pride RCFM4014 for sale at Rippeon Equipment Co., Maryland

Double tap to zoom

Land Pride RCFM4014 for sale at Rippeon Equipment Co., Maryland

 

Features

Features Benefits
Surpassed rugged
industry standards
All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing
procedures.
High gearbox HP rating Gearboxes are built rugged. See Specifications for actual Gearbox HP ratings.
3 Gearboxes Allows equal torque to be spread to left and right gearbox.
Spined blade hubs Spined blade hub offers tight non-slipping attachment to gearbox output shafts.
High blade tip speed Means cleaner cutting. See Specifications for actual blade tip speeds.
Spring loaded torque
dampeners between the center
and outboard gearboxes
Protects the driveline and gearboxes from hard objects in the blade path and resets to
prevent blades from hitting.
Slip-clutch protection
on main driveline
Slip-clutch is more convenient than shear-bolt, protects gearbox against sudden impact.
Cat. 2 and Cat. 3 Hitch Fits a wide range of tractors.
10 Gauge deck, fully welded Fully welded deck adds rigidity.
1/4" Thick sidewalls Protects sidewalls from thrown objects.
Round back design Allows for cleaner and efficient discharge of material, helps eliminate damage to rear
corners by not sticking out.
Full length skids with
reversible & replaceable shoes
Adds reinforcement to side panels. Reversible and replaceable skid shoes allow for change
before wearing through to weld-on piece.
Laminated tires Laminated tires can handle almost any condition and don’t go flat.
Dishpan Option
3/16" Round stump jumper
1" x 5" Blade bar
Stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft.
Heavy-duty blade bar adds support to stump jumper as well as gearbox output shaft.
1/2" x 4" Heat-treated blades Heat-treated blades last longer than non-heat-treated blades
3" Diameter cutting capacity Aids in cutting brush.
Shredder Kit Options
Without fixed blades
30" row spacing
38" & 40" row spacing
Good for Shredding row crops into small pieces. All kits include baffles to help maintain
shredded material in each section of the cutter for a consistent rear discharge.
Good for any row width.
Good for 30" row spacing. Includes fixed blades to reduce stalks into smaller pieces.
Good for 38" & 40" row spacing. Includes fixed blades to reduce stalks into smaller pieces.
Front rubber or chain guard
options and rear metal band,
rubber, or chain guard options
Reduces flying debris.
Three Tailwheel Option Third tailwheel helps protect against scalping the ground on uneven terrain.

Specifications

Specifications & Capacities RCFM4014
Weight With dish pan option, front rubber guard, & rear metal guard 3,350 lbs.
Hitch 3-Point category 2 & 3
Cutting width 14' - 0"
Overall width 14' - 6 1/2"
Overall length 10' - 0 1/2"
Deck height 12"
Cutting height 2" - 12"
Cutting capacity 3"
Tractor horsepower rating 80 hp minimum
Gearbox rating horsepower T-box - 250 hp, outboard 210 hp
Gearbox 1000 rpm power take-off driven gearbox with cast iron housing and beveled gears
Gearbox input/output shaft size Input shaft = 1 3/4" - 20 spline
Output shaft = 1 3/4" dia.
Gearbox lubrication 80-90W EP Gear Lube
Gearbox oil capacity
End boxes
T-box

10 Pints
14.16 Pints
Deck material thickness 10 Gauge
Deck side skirt thickness 1/4"
Skid shoes Replaceable and reversible
Tailwheels 6" x 9" x 21" Laminated caster
Wheel bearings Tapered roller bearing in cast iron hub
Intermediate driveline Cat 4 with spring loaded torque dampener
Blade bolts Keyed with harden flat washer and locknut
Blade tip speed
At center T-box
At outboard gearboxes

15,000 FPM
15,000 FPM
Driveline protection
Main
Intermediate Blade options Dish pan Shredder kit, 30" row Shredder kit, 38" & 40" row Shredder kit w/o fixed blades

1000 rpm - 4 plate slip clutch, Cat. 5
Spring-loaded flex coupler Options 1/2" x 4" Heat treated free-swinging suction blades with 3/16" round stump jumper Double stacked shredder blades with fixed knives & baffles, for 30" row spacing Double stacked shredder blades with fixed knives & baffles, for 38" & 40" row spacing Double stacked shredder blades with baffles, works on any row width
OPTIONS 
Blade options Dish pan
Shredder kit, 30" row
Shredder kit, 38" & 40" row
Shredder kit w/o fixed blades
1/2" x 4" Heat treated free-swinging suction blades with 3/16" round stump jumper
Double stacked shredder blades with fixed knives & baffles, for 30" row spacing
Double stacked shredder blades with fixed knives & baffles, for 38" & 40" row spacing
Double stacked shredder blades with baffles, works on any row width
Front guard options Optional: Rubber deflector or single chain guard
Rear guard options Optional: Metal guard, rubber deflector, or single chain guard.
Tailwheel options Optional: 2 tailwheels or 3 tailwheels
Breakaway light kit 6 pin hook-up connector, amber lights facing forward, amber & red light facing rearward
Lights are mounted on a spring-loaded, self-return, pivoting breakaway mount.