Rippeon Equipment Co., Maryland
Kubota
TRANSLATE
Rippeon Equipment Co., Maryland
Gaithersburg
866-Rippeon
700 East Diamond Ave
Gaithersburg, MD 20877
Call Us
Directions
Frederick
866-Rippeon
9640 Liberty Rd
Frederick, MD 21701
Call Us
Directions
Westminster
866-Rippeon
1115 Baltimore Blvd
Westminster, MD 21157
Call Us
Directions
Baltimore
866-Rippeon
3828 Washington Blvd
Baltimore, MD 21227
Call Us
Directions
Used Inventory »
New Inventory »
Shop Online

Ryan Lawnaire V with EST

New Equipment / Ryan / Aerators / Walk Behind Aerators / Lawnaire V with EST

Lawnaire V with EST for sale at Rippeon Equipment Co., Maryland. Serving your new and used equipment needs from Baltimore, Frederick, Gaithersburg, and Westminster, MD.

Ryan Lawnaire V with EST for sale at Rippeon Equipment Co., Maryland

Double tap to zoom

Ryan Lawnaire V with EST for sale at Rippeon Equipment Co., Maryland

 

Features

  1.  3/4” (19MM) DIAMETER, STEEL CORING TINES
    Unlike everyone else, our hardened alloy steel coring tines stay in the ground when you turn—and are durable enough to keep you out on the turf and out of the shop.

  2. EASY STEER TECHNOLOGY
    Save your strength with Easy Steer Technology and easily maneuver along paths and contours—even 180° turns. Outer tines rotate faster during turns to maintain deep core penetration without tearing up turf, increasing your productivity without sacrificing quality.

  3. SIZED TO YOUR NEEDS
    Need to maximize your productivity? The Lawnaire V has you covered with a 26.5-in aeration width.

Specifications

Specifications Lawnaire V with EST
POWER  
Honda® Engine Model 4-cycle Honda GX120;
recoil start; on/off switch; low-oil alert
Displacement 7.2 cu in. (118 cc)
Fuel Capacity 0.53 gal. (2 L)
Oil Capacity 0.59 qt (0.56 L)
Clutch Belt tightener
Drive: Primary 4L section V-belt
Drive:  Tine & Drum Single # 40 nickel-plated chain
Tines 0.75 in. (19 mm) diameter coring-type formed from
0.08 in. (2 mm) hollow, hardened alloy steel
# of Tines 42 tiner per aerator
Lubrication Grease zerks on the wheels
& idler pivot / oil chain
Coring Depth Up to 2.75 in. (70 mm)
Core Diameter 0.75 in. (19 mm)
Aerating Width 26.5 in. (673 mm)
Aeration Pattern 3.75 in. x 7 in. (95 mm x 178 mm)
Holes per Sq Ft. Up to 9 per sq ft (59/m2)
Productivity Aerates up to
40,000 sq ft/hr
(3,716 m2/hr) at 3.5 mph
Tires (2) 8x2.25 semi-pneumatic
w/ball bearings
DIMENSIONS  
Weight: Wet w/o Weights 250 lb (113 kg)
Weight: Wet w/Weights 292 lb (132 kg)
Weight: Wet w/Weights and Water in Drum 357 lb (162 kg)
Width 35.5 in. (902 mm)
Length 53.5 in. (1,359 mm)
Height 48.5 in. (1,232 mm)