Rippeon Equipment Co., Maryland
Kubota
TRANSLATE

Scag TLB25-49KBD

TLB25-49KBD for sale at Rippeon Equipment Co., Maryland. Serving your new and used equipment needs from Baltimore, Frederick, Gaithersburg, and Westminster, MD.

Scag TLB25-49KBD for sale at Rippeon Equipment Co., Maryland

Double tap to zoom

Scag TLB25-49KBD for sale at Rippeon Equipment Co., Maryland

 

Features

4-Blade Impeller

FABRICATED AND BALANCED, 25-INCH, 4-BLADE IMPELLER
Within the unit’s 10.5″-wide housing is a welded-steel impeller with 1/2″-thick steel blades. Dynamically balanced for reduced vibration, longer life and less stress on the engine, these loaders boast an effective, high-output (35BV = up to 6,781 CFM; 37CH = up to 6,909 CFM; 49KBD = up to 7,318 CFM), debris-reducing design.

Smart Construction and Convenient Serviceability

EASY ACCESS FOR WEAR PLATE AND IMPELLER SERVICE
1/4″-thick, bolt-in, replaceable wear liner extends service life. Removable rear-housing cover allows easy access to impeller and wear plates.

Locking Boom Arm and Intake Nozzle

SAFE AND CONVENIENT TRANSPORT
Transport lock safely secures the boom arm and hose when not in use; nylon bearing delivers smooth movement. A transport pin locks the nozzle to the loader to help protect the hose during transportation.

Ambidextrous Nozzle Handle

EASY HANDLING FROM EITHER SIDE: THE CHOICE IS YOURS
Padded, large-diameter handle is designed for increased leverage and easy maneuverability.

16" Steel Intake Nozzle

TAKE IT ALL IN
HUGE, replaceable intake nozzle makes debris pickup easy.

Adjustable Tongue and Hitch

FIT TO YOUR TRUCK – LONG OR SHORT, HIGH OR LOW
Choose from three different tongue lengths to best fit your specific application. A height-adjustable hitch gives the best fit your truck. A 2 5/16″ ball coupler comes standard on gas-powered units, but will accept a pintle hitch. Diesel-powered unit comes with standard pintle hitch, but will accept a 2 5/16″ ball coupler.

Built-In Tool Holder

KEEP YOUR RAKES, BROOMS AND SHOVELS WITHIN EASY REACH
Built-in, 3-hole tool holder with rubber rings protects handles from damage.

Large-Capacity Fuel Tank With Built-In Gauge

HOURS AND HOURS OF RUN TIME
High-capacity, 8.5-gallon, steel fuel tank with large filler neck for easy filling keeps you on the job. Built-in fuel gauge adds convenience and eliminates guesswork.

Ultra-Powerful Engine Options

HUGE POWER, UP TO 49 HP
Choose from a 35 hp Vanguard® BIG BLOCK™ or a 37 hp Kohler® Command PRO® EFI gasoline engine, or a 49 hp Kubota® diesel engine.

Specifications

Model TLB25-49KBD
Engine Tier 4 Compliant Kubota®, 4-cylinder, liquid-cooled, electric start
HP* 49
Fuel Capacity / Tank 8.5 gallons - plastic tank with built-in fuel gauge
CFM Output 7,318
Frame Construction All-steel, welded
Impeller Construction 4-blade, 1/2"-thick blades, all-steel, welded
Impeller Mounting Straight bore
Impeller Diameter / Width 25" / 9"
Blower Housing Construction Removable back panel for easy impeller and wear plate access
Blower Housing Width 10.5"
Blower Housing Wear Plates Standard: 1/4"-steel, replaceable
Intake Hose Specifications 84" length, 16"-diameter intake hose, 0.045 blue polyurethane rubber, wire helix with wearstrip
Unit Mounting Hitch: at least 10,000 lb rating
Discharge Tube Clear thermoplastic, 12" diameter, 84" length
Throttle Control Commercial-grade, all-steel mechanicals
Highway Ready** Yes - standard roadside package, including wheel chocks and cones
Axle Heavy-duty Dexter Torflex® axle (3,500 lb)
Tires 205 / 75 D15 highway tires with steel wheels
Trailer Width 66.75"
Accessories Light Kit, Brake Kit
Height 121.25"
Weight 2,300 lb