Rippeon Equipment Co., Maryland
Kubota
TRANSLATE

Scag SCZII-61RD-38CV-EFI

SCZII-61RD-38CV-EFI for sale at Rippeon Equipment Co., Maryland. Serving your new and used equipment needs from Baltimore, Frederick, Gaithersburg, and Westminster, MD.

Scag SCZII-61RD-38CV-EFI for sale at Rippeon Equipment Co., Maryland

Double tap to zoom

Scag SCZII-61RD-38CV-EFI for sale at Rippeon Equipment Co., Maryland

 

Features

The envy of the neighborh9ood

61" OR 72" CUTTING WIDTH

The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge. This deck is equipped with Scag’s ultra-tough cast-iron spindles featuring tapered roller bearings and a top-mounted grease fitting with a relief valve to prevent over-greasing.

Ogura PTO Clutch Brake

STRONG, ADJUSTABLE CLUTCH FOR LONG LIFE

The Ogura GT5 PTO Clutch Brake provides excellent starting and stopping power for the cutter deck, 350 ft. lb. of holding strength, and an adjustable air gap for long life.

Heavy-Duty, Double-Tube Steel Main Frame

SOLID DESIGN FOR YEARS OF DEPENDABLE SERVICE

The Cheetah™ is ultra-strong and built for long life. It has a wide mower stance and extra-low center of gravity for ultimate stability and a replaceable front caster-wheel weldment.

Hydro-Gear ZT-5400 Transaxles

SPEEDS UP TO 16 MPH!

Two-speed ZT-5400 transaxle lets you choose either Low Range to travel up to 12 mph or High Range for up to 16 mph. Internal 16 cc pumps and 21 cc motors help provide speed, power and torque. The transaxle’s design greatly reduces hoses and possible leak points.

Ease of Maintenance

MORE UPTIME

Flip-up components, easy-to-reach grease Zerks and many more features make servicing the Cheetah™ simple, so you can be in the shop less and on the job more.

Cheetah II Operator Suspension System

UNPARALLELED COMFORT

With five settings from soft to firm, the Operator Suspension System isolates the operator from the effects of rough terrain, providing unmatched comfort without sacrificing quality-of-cut. A coil-over shock provides effective suspension action right where it’s needed, and only where it’s needed. The seat’s 4-point, rubber iso-mounting provides even more shock absorption, maximizing your comfort, hour after hour.

Tiger Eye Advanced Monitoring System

KEEP A REAL-TIME "EYE" ON IMPORTANT SYSTEM FUNCTIONS

Depending on the mower model and engine selection, the Tiger Eye™ Advanced Monitoring System monitors a wide variety of systems in real-time, giving you valuable information in just a glance, right from the operator’s seat.

12-Volt Outlet

KEEP YOUR DEVICE CHARGED AND READY

12-volt outlet for added convenience allows operators to plug in small accessories or keep their phones at full charge.

Powerful and Efficient Engine Options

HUGE POWER, UP TO 38 HP

Choose either a powerful, 38HP Kawasaki® or 37HP Briggs Vanguard™ air-cooled; electronic fuel injection (EFI) engine. Rear-Discharge model features 31HP Kawasaki FX engine.

Specifications

Model Description
SCZII-61RD-38CV-EFI 61" Velocity Plus™ Rear Discharge Cutter Deck, 38 HP Kohler® Command PRO® EFI – electronic fuel injection BLACKOUT EDITION
Product Dimensions
Length 87"-91.25"
Width (chute down) 73.5"
Width (chute in transport position) 62.75"
Height (ROPS down) 49.5"
Height (ROPS up) 67"
Weight 1,364-1,392 lb
GENERAL 
Total Fuel Capacity 13 gallons
Drive Tires 24" x 12" - 12"
Caster Tires 13" x 6.5"-6"
Seat 4-point iso-mounted mid-back mounted on operator-suspension platform
DRIVE SYSTEM 
Drive System Type Hydro-Gear ZT5400 Transaxle. Two-Speed
Pumps Internal Pump: 16 cc
Motors Internal Motor:  21 cc
Forward Ground Speed 16 mph (high-speed)
12 mph (low-speed)
Reverse Ground Speed 8 mph (high-speed)
5 mph (low-speed)
Parking Brake Foot-operated pedal
DECK 
Cutting Widths 61" 
Type Velocity Plus™
Cutting Height 1.25" to 5" in .25" increments
Deck Lift Adjustable foot-operated pedal
Construction Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2" of steel. Reinforcement plates at cutter deck spindles.
Spindles Cast-iron housing with tapered roller bearings.
Blade Engagement Ogura GT5 (350 ft lb)
Adjustable air-gap for extended life.