STCII-61V-26FT-EFI for sale at Rippeon Equipment Co., Maryland. Serving your new and used equipment needs from Baltimore, Frederick, Gaithersburg, and Westminster, MD.
Double tap to zoom
48", 52" OR 61" CUTTING WIDTH
The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge. This deck is equipped with Scag’s ultra-tough cast-iron spindles featuring tapered roller bearings and a top-mounted grease fitting with a relief valve to prevent over-greasing.
STRONG, ADJUSTABLE CLUTCH FOR LONG LIFE
The Ogura GT3.5 PTO Clutch Brake provides excellent starting and stopping power for the cutter deck, 250 ft. lb. of holding strength, and an adjustable air gap for long life.
SOLID DESIGN FOR YEARS OF DEPENDABLE SERVICE
Heavy-duty, single-tube, steel main-frame construction delivers superior strength and ensures years of trouble-free service. The front caster-wheel weldments are replaceable.
SPEEDS UP TO 12 MPH
Dual Hydro-Gear pumps (12 cc) and Parker wheel motors (14.5 ci) deliver dependable power. Pump shock valves ensure reliability and long life. Cooling fans help maintain safe operating temperatures.
Flip-up access panels, an unrestricted engine compartment, easy-to-reach grease zerks and many more features make servicing the Tiger Cat® simple, so you can be in the shop less and on the job more.
RIDE IN COMFORT
Torsion-spring suspension seat adjusts to each operator’s weight to provide superior comfort. Seat features full padding, forward/rearward adjustment, a high back, adjustable armrests and an adjustable back angle. The 4-point, rubber iso-mounting provides even more shock absorption, maximizing your comfort, hour after hour.
KEEP A REAL-TIME "EYE" ON IMPORTANT SYSTEM FUNCTIONS
Depending on the mower model and engine selection, the Tiger Eye™ Advanced Monitoring System monitors a wide variety of systems in real-time, giving you valuable information in just a glance, right from the operator’s seat.
KEEP YOUR DEVICE CHARGED AND READY
12-volt outlet for added convenience allows operators to plug in small accessories or keep their phones at full charge.
BIG POWER, UP TO 32 HP
Choose from a Kawasaki®, Briggs Vanguard™ or Kohler® air-cooled engine; electronic fuel injection (EFI) options are available.
|Engine & Deck Combinations||61" Velocity Plus™ Cutter Deck, 26 HP Kawasaki®730FT - electronic fuel injection|
|Width (chute down)||64.5"|
|Width (chute in transport position)||53.75"|
|Height (ROPS folded)||46.75"|
|Height (ROPS up)||67.25"|
|Total Fuel Capacity||9.5 gallons|
|Drive Tires||24" x 9.5"-12" (48" and 52")
24" x 12"-12" (61")
|Caster Tires||13" x 6.5"-6", flat-free|
|Seat||4-point iso-mounted mid-back mounted on operator-suspension platform|
|Drive System Type||Dual Pump and Motor|
|Pumps||Hydro-Gear 12 cc|
|Motors||Parker 14.5 ci|
|Forward Ground Speed||12 mph|
|Reverse Ground Speed||5 mph|
|Parking Brake||Foot-operated pedal|
|Cutting Widths||48", 52" and 61"|
|Cutting Height||1" to 5" in .25" increments|
|Deck Lift||Adjustable foot-operated pedal|
|Construction||Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2" of steel. Reinforcement plates at cutter deck spindles.|
|Spindles||Cast-iron housing with tapered roller bearings.|
|Blade Engagement||Ogura GT3.5 (250 ft lb)
Adjustable air-gap for extended life.
Accessories and Attachments
CLAM-SHELL GRASS CATCHER
DUMP-FROM-YOUR-SEAT GRASS CATCHER
The Scag® Clam-Shell Grass Catcher (GC-CS) is the perfect answer for operators that do not want to leave the mower’s seat to dump their debris. This simple-to-use catcher system allows you to dump the hopper by pulling a lever.
After the initial installation, the entire catcher assembly can be removed and reinstalled in minutes without any tools! Just pull three quick-pins, release the belt and lift it off. A 12-bushel-capacity hopper collects debris from a blower that pulverizes the debris, reducing particle size and increasing the density inside the hopper. What does this mean to you? Shredding the debris allows you to pack from 50% to over 100% more into the same amount of space when compared to other grass catchers on the market. Simply put, you will be able to collect more debris before you have to stop and empty the hopper. That saves time and greatly increases productivity. Talk to your Scag Dealer today to learn more about availability on this incredible collection system.
NOTE: The Clam-Shell Grass Catcher fits most 2002 and newer models (with Velocity Plus™ Cutter Decks) and is not available for 72″ models. Grass catchers are not compatible with propane and dual-fuel models.
3-BAG GRASS CATCHER
After the initial installation, the entire 3-Bag Grass Catcher (GC-3B) assembly can be removed and reinstalled in just minutes without any tools. Just pull three quick-pins, release the belt and lift it off. A 16-bushel capacity hopper collects debris from a blower that pulverizes the debris, reducing particle size and increasing the density inside the bags.
What does this mean to you? Shredding the debris allows you to pack from 50% to over 100% more into the same amount of space when compared to other grass catchers on the market. Simply put, you will be able to bag more debris before you have to stop and empty the bags. That saves time and greatly increases productivity. See your Scag® Dealer today to get your hands on this incredible catcher system.
NOTE: The 3-Bag Grass Catcher fits most 2002 and newer models (only those with Velocity Plus™ Cutter Decks) and is not available for 72″ models. Grass catchers are not compatible with propane and dual-fuel models.
HURRICANE PLUS™ MULCH SYSTEM
TAKE MULCHING TO A NEW LEVEL
The Hurricane Plus™ features a patented design that takes mulching to a new level. With “Eye of the Hurricane” mulching plates, bolt-in baffles, special Eliminator™ mulching blades and a side-discharge block-off plate, the Hurricane Plus system cuts and recuts clippings into a fine mulch before dispersing them into the lawn.
The “Eye of the Hurricane” mulch plates that keep clippings in the path of the Eliminator blades, and this design ensures clippings are finely shredded and forcefully scattered down toward the soil, returning vital nutrients to the turf. Not only does this save you time and keep the lawn healthy, but it also benefits the environment by reducing landfill waste.
Each Hurricane kit includes a set of serrated “Eliminator” mulching blades with a high lift, “double-cut” edge for quick, thorough shredding of grass clippings and debris. Vital nutrients are put back into the soil.
The Scag® Hurricane Plus Mulch System fits all Velocity Plus™ Cutter Decks.
OCDC – OPERATOR-CONTROLLED DISCHARGE CHUTE
TURN THE DISCHARGE ON OR OFF WITH A TWIST OF THE WRIST
Few things can ruin the look of a perfectly manicured landscape like the unsightly appearance of clippings and debris on sidewalks and driveways, and in flowerbeds. It’s not always easy or possible to keep mower discharge from blowing onto these areas, so you end up spending additional time to clean things up after mowing. This extra clean-up time hurts your productivity and profitability.
The Scag® Operator-Controlled Discharge Chute (OCDC) allows the operator to temporarily close off the cutter deck’s discharge opening when mowing along sidewalks, around flowerbeds, etc. Keeping clippings out of these areas saves you precious time to get other jobs done and make more money. A simple twist of the lever lifts the chute and closes the discharge opening—both happen at the same time with a simple handle twist.
TIGER STRIPING AND LAWN PATTERN SYSTEMS
TAKE YOUR LAWN TO THE NEXT LEVEL
The patented Scag® Tiger Striper Lawn Striping System is the ultimate way to enhance the striping ability of your Scag. This lawn striper has unique features that allow you to turn the striping on and off, and remove the entire roller system without tools by pulling two “quick pins.” It is spring-loaded so it applies downward pressure onto the grass. This further enhances the stripe and allows the roller to contour to uneven terrain better than standard fixed rollers, even at high mowing and transport speeds.
Learn How Lawn Striping Works and How Lawn Patterns Are Made!
The entire lawn-striping system mounts behind the rear drive tires. The advantage to mounting the roller at the rear is that it is the last thing to contact the grass. The tires and cutter deck pass over the grass and as a final step, the roller intensifies and evens out the stripe.
*Tiger Striper shown is for Turf Tiger™ II, Cheetah II™ and Tiger Cat® II. Widths of the roller assembly and number of rollers will vary with mower model.
Chrome Wheel Covers
Air Filter Monitor