Rippeon Equipment Co., Maryland
Kubota
TRANSLATE

Toro GrandStand® MULTI FORCE 52" (132 cm) 26.5 HP 747cc EFI (72529)

GrandStand® MULTI FORCE 52" (132 cm) 26.5 HP 747cc EFI (72529) for sale at Rippeon Equipment Co., Maryland. Serving your new and used equipment needs from Baltimore, Frederick, Gaithersburg, and Westminster, MD.

Toro GrandStand® MULTI FORCE 52" (132 cm) 26.5 HP 747cc EFI (72529) for sale at Rippeon Equipment Co., Maryland

Double tap to zoom

Toro GrandStand® MULTI FORCE 52" (132 cm) 26.5 HP 747cc EFI (72529) for sale at Rippeon Equipment Co., Maryland

 

Features

25% Faster Speeds
The 10 mph transport speed gets you to your next destination 25% faster.*

Smaller Footprint
With the platform folded, the small footprint allows you to transport more products on the trailer.

Better Visibility
Exceptional operator visibility leads to less property damage and higher quality work.

Easier Maintenance
Access to both sides of the engine, hydros and controls with the easy removal of the fuel tank.

Less Maintenance Needed
The elimination of hydraulic hoses, reduced parts, no routine greasing and simplified design, save you time.

Comfortable Ride
The platform has self-adjusting suspension, a larger open area to move around, and sloped sides for a more secure stance when cutting sloped terrain.

Ultimate Cutting Deck
Our exclusive TURBO FORCE cutting deck is built to withstand the extreme conditions of long, tough days on the job. It features a durable bull-nose bumper, high-strength blades and the industries toughest spindle assemblies.

Extra Large Fuel Tank
10.5 gallon fuel tank requires less filling and more time working. Transparent tank make it easy to gauge the fuel level.

Traction On Hills
The low center of gravity of stand-on mowers hug hills and slopes. Operators can easily shift their weight as needed to enhance performance.

Smarter design in a bull-nose bumper.
7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.

A Flat Crisp Cut with Precision Blades
(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

Patented Adjustable Baffle
Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.

Specifications

  • Engine
    26.5 hp Kohler Command EFI 747cc
  • Fuel Capacity
    10.5 gallon
  • Mowing Speed
    Up to 10 mph
  • Transport Speed
    10 mph
  • Cutting Width
    52" (132 cm)
  • Adjustable Discharge Baffle
    Standard, tools-free
  • Air Filter
    HD Canister
  • Blade Tip Speed
    18,500+ ft/min
  • Blade Type
    1/4" (6.4 mm) thick heat-treated steel
  • Carrier Frame
    3" x 1.5" (8 x 4 cm) tubular steel
  • Caster Tires
    11" x 5"-5" (28 x 13-13 cm) flat free semi-pneumatic
  • Deck Design
    80-grade 7-gauge 52" (132 cm) TURBO FORCE® w/bull-nose bumper
  • Discharge Chute
    High-performance rubber
  • Drive System
    Integrated hydraulics (no hoses)
  • Drive Tires
    20" x 10.5"- 8" (51 x 26.67 - 20 cm)
  • Engine Horsepower
    26.5 hp
  • Engine Displacement
    747cc
  • Ground Speed
    0 - 10 mph (0 - 16 kmh)
  • Height of Cut
    1.5" - 5" (3.81cm - 12.70 cm)
  • Hydraulic Fluid
    Premium synthetic
  • Optional Attachments
    Snow Removal Plow, EZ-Vac Powered Bagger, Power Broom, Pro Force Debris Blower, Tine Rake Dethatcher, Hooker Aerator
  • Spindle Bearings
    Greaseless ball bearings
  • Spindle Housing
    9" (22.9 cm) diameter cast aluminum
  • Steering Controls
    Twin lever
  • Weight
    908 lb (411.9 kg)

Accessories and Attachments

Power Broom (78596)
NEW 55" (139.7 cm) Power Broom designed to tackle sidewalks and clear snow and debris down to the pavement.

Additional Parts required. (If you already have the BOSS plow attachment you will only need part # 78601.)
High-Flow Hydraulics Kit (Toro) - part # 78601
Low-Flow Hydraulics Kit (Boss) - part # MSC13950
Triangle Attachment Plate (Toro) - part # 136-0513


E-Z Vac Twin Bagger (78570)
Side-mounted Soft Twin Bagger has a large 10 cu. Ft. (8 bushel) (0.28m3) capacity and the vertically-mounted blower allows for excellent maneuverability in tight spaces and maximum visibility.


Pro Force® Debris Blower (78593)
The Pro Force Blower has a 360º nozzle rotation and utilizes the MULTI FORCE 26.5 hp Kohler® Command Pro™ EFI engine to deliver tremendous air power for fast removal of grass clippings, leaves, or other debris.

Additional parts required.
Low-Flow Hydraulics Kit (Boss) - part # MSC13950


Tine Rake Dethatcher (78690)
Turn your Toro Grandstand Multi-Force into the ultimate spring clean-up tool with Multi-Force front-mount Tine Rake Dethatcher. Use the rake for the first mowing of the spring to remove thatch, embedded leaves and debris. The patented tines lift thatch without damaging healthy turfgrass. And comb matted grass gives the lawn a clean, hand-raked appearance.


Hooker Aerator (78694)
Transform your Grandstand Multi-Force into an aerator with the 38-inch wide Multi-Force Hooker Aerator. You'll finish jobs faster than ever, as the aerator punctures up to six holes per square foot. Holes are approximately 1/2" wide by 1-1/4" long and up to 3" deep. Tines pierce deep into the soil, hooking and lifting loose plugs of dirt that disperse quickly, spreading nutrients over the surface. No unsightly hard plugs accumulate on the lawn. The lifting action of the tines prevents soil compaction that is common with hollow tine aerators and allows good filtration of air and water into the lawn.


Leaf Blade Plow (78697)
The heavy-duty GrandStand MULTI FORCE Leaf Blade Plow attachment uses the mower's power to quickly move piles of leaves. It virtually eliminates "tarping" and moves windrowed leaves for collection. The one-piece, 55" (139.7 cm) wide galvanized steel blade has supports at the top, center and bottom for durability. The Leaf Blade rides on two adjustable caster wheels. Flat 4.5" (11.4 cm) long stainless spring steel tines allow the Plow to push leaves on uneven surfaces without damaging turfgrass. The Leaf Blade may be folded up over the deck to reduce space on the trailer.

Additional Parts required.
Leaf Plow Mount (Toro) - part # 78698


Snow Thrower (78598)
48" (122 cm) Snow Thrower designed to tackle sidewalks and clear snow down to the pavement. Urethane trip edge to help plow over manhole covers, cracks, and cobblestone. Additional Parts required. (If you already have the BOSS plow attachment you will only need part # 78601.) High-Flow Hydraulics Kit (Toro) - part # 78601 Low-Flow Hydraulics Kit (Boss) - part # MSC13950 Wheel Weight Kit (MULTI FORCE 2016 and newer) - part # 133-5386 Pneumatic Castor Wheel Kit (2 Tires) - part # 140-4311


MULCH FORCE Mulch Dump (78597)
You have a job to do, and you want to get it done efficiently. Moving and spreading mulch is no easy task, especially when you use an oldfashioned wheelbarrow. Get with the times – the Toro MULCH FORCE bucket helps you to move nearly twice as much mulch three times as fast per load as using a traditional wheelbarrow. The hydraulically driven MULCH FORCE dump enables you to easily dump the exact amount in tree rings or retainers. This is mulch efficiency at its finest.

Additional parts required.
Low-Flow Hydraulics Kit (Boss) - part # MSC13950
Quick Attach Kit - part # 136-0513


Optional Blades
In addition to the high sail blade, which comes standard on Z Master® Z590 Series mowers, additional 1/4" (6 mm) blades are available to match regional and seasonal mowing conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.


Light Kit
The lights easily mount to the mower frame and wiring quickly connects to the existing accessory circuit.

Part # 107-9880 – 7000 Series and Z100-Z500
Part # 116-1154 – G3 and 3000/5000/6000 Series
Part # 130-8469 – 8000 Series Direct Collect Z
Part # 114-3505 – All Grandstands (2015 models and prior)
Part # 133-1437 – All Grandstands (2016 models)
Part # 133-1495 – All Grandstands (2016 models)