Toro Dingo® TX 525 Narrow Track

4-Pump Hydraulic System
4-pump hydraulic system lets you simultaneously operate the loader, bucket, traction, and auxiliary drives for increased operator efficiency. This system directs hydraulic power precisely where you need it!

Compact Size
Narrow enough so you can bring hydraulic power to tight areas; through doorways and gates previously accessible only by manual labor. Plus it provides zero radius turn capability for unmatched maneuverability.

Exclusive TX Track Drive
Low center of gravity and large footprint increase stability on side hills and provide smooth operation over rugged terrain; eliminates tire ruts and flat tires.

Hydraulic Power
Up to 10.8 gpm (40.9 lpm) at 3000 psi (207 bar) hydraulic system gives you incredible hydraulic power to auger up to 30" (76 cm) holes or trench 36" (91 cm) deep.

Liquid-Cooled Diesel Engine
The 23.3 hp (17.3 kw) Kubota diesel engines torque curve combined with the added auxiliary hp provide attachments the added power tough jobs require.

Simple Controls
You're up and running in a flash with three easy-to-use controls. 1) The joystick loader control lets you curl, dump or float the bucket while simultaneously raising or lowering the loader arms - all with one hand. 2) With your other hand, you can grab the one-hand traction drive from any angle, for effortless control. 3) The third control, the auxiliary circuit control lever, which can be activated while operating the traction drive, powers the attachments instantly.

• Cooling System
  Liquid Cooled
• Engine
  23.3 HP (17.3kW) Kubota D902
• Flow
  Traction: 16.9 gpm (each pump); Auxiliary: 13.8 gpm
• Ground Clearance
  4.6" (11.7 cm)
• Ground Pressure
  5.0 PSI
• Ground Speed
  0-4.5 mph (0-7.2 km/h) / 0-2.0 mph (0-3.2 km/h)
• Height
  46.1" (117.1 cm)
• Hinge Pin Height
  65.8" (167.1 cm)
• Hydraulic System Pressure
  3,000 PSI
• Length
  92" (233.7 cm) w/bucket; 70.7" (180 cm) w/o bucket
• Loader Arm Flow
  6 gpm (22.7 lpm)
• Loader Hydraulic System
  Joystick control for all funct
• Operating Capacity
  553 lbs. (251 kg)
• Reservoir Capacity
  10.5 gallons (40 liters)
• Tip Capacity
  1,580 lbs. (717 kg)
• Track
  96.6" x 5.9" (245 cm x 15 cm)
• Traction Flow
  16.9 gpm (64 lpm)
• Weight
  1,904 lbs (864 kg)
• Width
  33.7" (85.6 cm)
• Disclaimer
  *See your local dealer for warranty details.

Compact Utility Loader Attachments
From earth moving, tilling and trenching to leveling, lifting, hauling and demolishing, all Toro Dingo models can be equipped with over 35 attachments to handle and endless amount of tasks.

Ride-On Platform
Quickly and easily bolted on to any Toro Dingo TX model (except TX 413), this ride-on platform helps minimize operator fatigue - especially in applications requiring a lot of hauling and covering substantial distances.

Aggressive Tread Tracks
Make those difficult job site conditions easier to maneuver with this aggressive track option.

Dingo Light Kit
Make night and dark work places, shine.