Rippeon Equipment Co., Maryland
Kubota
TRANSLATE

Toro 5000 Series Rear Discharge 72" (183 cm) 26.5 HP EFI 747cc (72945)

5000 Series Rear Discharge 72" (183 cm) 26.5 HP EFI 747cc (72945) for sale at Rippeon Equipment Co., Maryland. Serving your new and used equipment needs from Baltimore, Frederick, Gaithersburg, and Westminster, MD.

Toro 5000 Series Rear Discharge 72" (183 cm) 26.5 HP EFI 747cc (72945) for sale at Rippeon Equipment Co., Maryland

Double tap to zoom

Toro 5000 Series Rear Discharge 72" (183 cm) 26.5 HP EFI 747cc (72945) for sale at Rippeon Equipment Co., Maryland

 

Features

Exclusive TURBO FORCE Deck
High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.

7-Gauge, High-Strength Steel
The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.

A Flat Crisp Cut with Precision Blades
(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

Deluxe Suspension Seat
Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue.

Smarter design in a bull-nose bumper.
7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.

Patented Adjustable Baffle
Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.

Smooth, Powerful Response
The new unitized pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You'll get a smoother, faster response while enjoying an even more reliable machine.

Operator Information Center
The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.

Folding Rollover Protection System ROPS
A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

Cast Aluminum Spindle
Cools quickly for enhanced durability and performance.

Specifications

  • Engine
    26.5 hp* (20 kw) Kohler® Command Pro EFI 747cc
  • Fuel Capacity
    Gas/12 gal (45.4 L)
  • Adjustable Discharge Baffle
    Standard
  • Air Filter
    Heavy-Duty Canister Air Cleaner
  • Armrests
    Standard
  • Blade Tip Speed
    18,500+ ft/min (5638.8 m/min)
  • Blade Type
    .25 in (.6 cm) thick heat-treated steel
  • Carrier Frame
    3" x 1.5" x 10 gauge (7.6 cm x 3.8 cm x 10 gauge)
  • Caster Tires
    13" X 6.5" – 6" (33 cm x 16.5 cm – 15.2 cm) Flat-Free Semi-Pneumatic
  • Cup Holder
    Standard
  • Deck Design
    80-Grade 7-gauge 72" (182.9 cm) TURBO FORCE® Rear Discharge w/ bull-nose bumper
  • Discharge Chute
    Rubber
  • Drive System
    Unitized Pumps 12cc/rev (shock valves) & Wheel Motors (14.6 cir)
  • Drive Tires
    24" x 12" – 12" (61 cm x 30.5 cm – 30.5 cm)
  • Ground Speed
    10 mph forward (16.1 kph)
  • Height of Cut
    1 in - 5.5 in (2.5 cm x 14 cm) by .25 in (.6 cm) increments
  • Number of Blades
    3
  • Hour Meter
    Standard
  • Hydraulic Fluid
    Premium synthetic
  • ROPS
    Folding; standard
  • Seat
    Handcrafted deluxe suspension seat with arm rests featuring bullhorn accent
  • Spindle Bearings
    Greaseless ball bearings
  • Spindle Housing
    9" (22.9 cm) diameter cast aluminum
  • Steering Controls
    1-5/8" (4.1 cm) diameter grips; adjustable, dampened
  • Weight
    1.335 lbs. (605.5 kg)
  • Disclaimer
    *The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.

Accessories and Attachments

E-Z Vac™ DFS Collection System
Quiet and powerful, the Toro E-Z Vac™ collection system is spindle-driven and offers quick conversion between bagging and side discharge without tools.The horizontal blower impeller is positioned parallel to, and above the mower deck creating continuous airflow from deck to collection system. The Dump-From-the-Seat (DFS) features allows you to dump debris in only seconds - without ever having to leave your seat!

Deck-mounted, spindle-driven fan; Dump-From-the-Seat, commercial- grade steel and polyethylene hopper; 8.3 cu. ft. capacity (6.7 bushels).
L 48" deck – 103.2" (262.0 cm)
W 48" deck – 63.9" (162.3 cm)>
L 52" deck – 103.2" (262.0 cm)
W52" deck – 67.8" (172.1 cm)

Deck-mounted, spindle-driven fan; Dump-From-the-Seat, commercial- grade steel and polyethylene hopper; 13.7 cu. ft. capacity (11 bushels).
L 60" deck – 107.1" (271..9 cm)
W 60" deck – 75.2" (191.1 cm)
L72" deck – 110.2" (281.3 cm)
W 72" deck – 87.2" (221.1 cm)
NOTE: Length & width measurements are as installed.


E-Z Vac Twin & Triple Bagger Systems
These baggers deliver the convenience and versatility essential to landscape professionals' productivity. The no-tools, quick-release design allows you to remove the collection system with ease, making it a snap to alternate between bagging and side-discharge.

E-Z VAC TWIN BAGGER
Deck-mounted, spindle-driven fan; 2 commercial-grade mesh bags with reinforced front and bottom; 10 cu. ft. capacity (8 bushels).
L 48" deck – 102.3" (259.8 cm)
W 48" deck – 63.8" (162.1 cm)
L 52" deck – 102.3" (259.8 cm)
W 52" deck – 67.7" (172.0 cm)

E-Z VAC TRIPLE BAGGER
Deck-mounted, spindle-driven fan; 3 commercial-grade mesh bags with reinforced front and bottom; 16.7 cu. ft. capacity (13.4 bushels).
L 60" deck – 106.1" (271.9 cm)
W 60" deck – 75.2" (191.1 cm)
L 72" deck – 109.3" (279.1 cm)
W 72" deck – 87.2" (563.9 cm)
NOTE: Length & width measurements are as installed.


Light Kit
The lights easily mount to the mower frame and wiring quickly connects to the existing accessory circuit.

Part # 107-9880 – 7000 Series and Z100-Z500
Part # 116-1154 – G3 and 3000/5000/6000 Series
Part # 130-8469 – 8000 Series Direct Collect Z
Part # 114-3505 – All Grandstands (2015 models and prior)
Part # 133-1437 – All Grandstands (2016 models)
Part # 133-1495 – All Grandstands (2016 models)


Optional Blades
In addition to the high sail blade, which comes standard on Z Master® Z590 Series mowers, additional 1/4" (6 mm) blades are available to match regional and seasonal mowing conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.


Recycler® Mulching Kits
Recycler mulching kits deliver the industry's finest mulching performance and reduce mowing time up to 38% vs. bagging*.

*Respondents in a Texas A&M University study cut their lawns 38% faster when they didn't bag.


Roller Striping Kit
Roller striping kit is easily installed and provides a premium "ball park" after-cut appearance.


Toro Z Stand™
Exclusive Toro Z Stand provides an on-board tool to simply elevate the front end of the machine and provide access to the underside of the deck.

Part # 105-1622 Z Stand Kit – Z200, Z500, 7000 Series
Part # 117-0354 Z Stand Kit – 72" 5000/6000 Series (Excludes Rear Discharge 74944)
Part # 121-4811 Z Stand Kit – 48"-60" 2000/3000/5000/6000 Series