Toro 8000 Series 48" (122 cm) 23 HP 747cc (74312)
8000 Series 48" (122 cm) 23 HP 747cc (74312) for sale at Rippeon Equipment Co., Maryland. Serving your new and used equipment needs from Baltimore, Frederick, Gaithersburg, and Westminster, MD.
Double tap to zoom
Bag, Mulch or Both
The fill-reduction system lets you switch from 100% bagging to 75% mulching and 25% bagging, so the hopper can be emptied less frequently.
No need to muscle these mowers around. The controls let you maneuver in tight spots almost effortlessly.
The 9.5-bushel hopper means less time emptying and more time mowing. Exclusive baffle design fills evenly back to front for maximum efficiency.
Out Front Deck Design
The out-front deck design allows for more maneuverability and mowing in tighter areas where traditional zero turns can't get to.
Tough, Deep Decks
Commercial deck is made of welded 7/10 gauge-steel. The deep 4-5/8" design handles taller grass and provides greater vacuum for a clean, refined cut.
Trim On Both Sides
The rear discharge deck allows for trimming on either side keeping flower beds and walkways clipping-free.
23 HP* (17.1 kw) Kohler® Command Pro EFI 747cc
- Fuel Capacity
Gas/7.5 gal (28.4 L)
- Cutting Width
48" (121.9 cm)
- Adjustable Discharge Baffle
Fill reduction baffles standard
- Air Filter
Heavy-Duty Canister Air Cleaner
- Blade Tip Speed
18,500 ft/min (5,640 m/min)
- Blade Type
.164" (.417 cm) heat-treated steel
- Carrier Frame
2" x 1.5" x 11 gauge (5.1 cm x 3.8 cm x 11 gauge)
- Caster Tires
8" X 3" – 4” (20.3 cm x 7.6 cm – 10.2 cm) Semi Pneumatic
- Deck Design
- Drive System
Tandem Pumps (12cc/rev) & Wheel Motors (18 cir)
- Drive Tires
18" x 10.5" – 10" (45.7 cm x 26.7 cm – 25.4 cm)
- Engine Horsepower
- Engine Displacement
- Ground Speed
Up to 7.0 mph forward (11.4 km/h)
- Height of Cut
1" - 4" (.25" increments) 2.5 cm – 10.2 cm (.6 cm increments)
- Hopper Capacity
9.5 bushels (76 gallons)
- Hour Meter
- Spindle Housing
Cast Iron Gearbox
- Steering Controls
Hand Control Levers
1,170 lbs. (530.7 kg)
*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.